The safety of this fixture is only guaranteed if the instructions have been observed.
— Always disconnect power before working on fixture.
— Fixture must not be installed in any position other than that shown in instructions.
— Assembly and maintenance of fixture must be performed carefully so as not to damage components.
— Replacement bulbs must be of same type and wattage as specified in instructions.
— Metal surfaces, glass or other parts of fixture may be cleaned with a soft damp cloth and mild detergent.
— DCW ÉDITIONS will replace merchandise with manufacturing defects only if it is returned to the retailer from which it was purchased.
— If you are unsure about your wiring, please consult a qualified electrician. The damaged cables should be changed by manufacturer or distributor or qualified electrician.

If you use the charger, use the plug adapted to the country where the device is used. Engage the plug and turn to the right until it is fully engaged. To change the plug, press the button on the power box. Insert the USB-A plug into the power box connector.

If you are using the multi-charger, insert the USB-A plug into one of the USB ports. After connecting the multi-charger to the power supply, turn on the power by pressing the switch on the side of the device.

Insert the USB-C plug into the connector of the device. The complete charging time is 3 hours. When the device is switched on at 100% of the luminous intensity, the autonomy is 7 hours without cable.

For more information, download the product sheet & instruction sheet